Vintage Air Billet Deluxe RGB SureFit Control Panel For 1967–1968 Camaro And Firebird

Caecey Killian May 29, 2026 4 min read 0

15

The Vintage Air SureFit panel for 1967-1968 Camaro and Firebird is a direct bolt-in solution that looks and works like it was built for that dash from the factory, because it was. If you run a GEN IV or GEN 5 climate control system and the stock-style plastic control face is the last thing holding your interior back, this is the piece that ties the whole build together.

What Makes The Vintage Air SureFit Panel Different

Most upgraded control panels offer a cleaner look. This one goes further because Vintage Air CNC-machines the bezel from 6061-T6 aluminum with a black anodized housing. The machining is tight, and the finish is consistent. Since it fills the OEM dash opening exactly, you do not need to shim, trim, or fabricate anything. Pull the old panel, drop this one in, connect the wiring harness, and button it up.

The backlighting is where the Vintage Air SureFit panel separates from budget options. Integrated RGB LEDs with user-selectable colors let you match the rest of your interior lighting. For instance, you can dial in a warm incandescent tone to match factory-style gauges or go cooler and more modern. A dedicated blue LED backlit indicator shows A/C engagement status at a glance, so there is no hunting for a second read.

Variable slide controls handle fan speed, temperature, and airflow mode selection. The slides move smoothly and hold their position. That matters because sloppy aftermarket controls drift and feel vague under your fingertips. These feel like production-quality hardware, not a catalog substitute.

Dakota Digital Gauge Sync On The SureFit Panel

The included sync cable for Dakota Digital HDX, RTX, and GRFX gauge packages is one of the better-thought-out features on this panel. If your build runs any of those gauge systems, the control panel backlight pulls the same color signal and stays matched to whatever you dial in on the cluster. As a result, you avoid running a separate lighting controller and eliminate any color mismatch between the gauges and dash controls. That integration detail shows up in person and in photos.

The optional RGB remote setup cable (PN# 238004) does the same job as the push-button switch on the back of the panel. The difference is placement. Since you can mount the remote cable somewhere accessible inside the cabin, it works well on builds where the dash is tight or the controls are tucked.

Installing The Vintage Air SureFit Panel

The kit ships with a complete wiring harness, mounting hardware, and detailed installation instructions from Vintage Air. Because this is a SureFit product, Vintage Air engineers the mounting points and connector locations specifically for the 1967-1968 Camaro and Firebird dash opening with GEN IV or GEN 5 systems. The harness plugs in where it belongs. The bezel sits flush in the opening. No universal-fit guesswork required.

Everything you need to get the panel in and running is in the box. Vintage Air includes a complete wiring harness, mounting hardware, the Dakota Digital gauge sync cable, and the full RGB backlighting system. Because the kit is vehicle-specific, there is no need to hunt down adapters or source a separate harness to make it work in your dash. Pull the old panel, plug in what came in the box, and the install is done. That is the difference between a SureFit product and a universal piece you spend an afternoon adapting.

The Right Finish For A Build That Deserves It

Interior details carry weight in the classic Camaro and Firebird world. You can build the cleanest small block on the street and still have judges spending as much time looking through the window at the dash as they do at the engine bay. Because the Vintage Air SureFit panel uses machined aluminum with functional lighting integration, it earns that attention without requiring a fabricator to finish the job.

If you want to see what a fully built 1968 Camaro looks like with Vintage Air already in the cabin, take a look at the Pro Touring Camaro with a hand-built LS7 we covered. Same platform, same era, and a completely different car to live with because of it.

AboutCaecey Killian

Caecey Killian covers builds, installs, and product features for Car Junkie Magazine. He has spent years on the floor of the garage chasing horsepower across SBC, LS, and modern muscle platforms, and that shop time runs through every article he writes. His current CJM project is Project Street Reaper, a 1976 Camaro built around a fresh SBC 350. He is also known for Project Mighty Mouse, a 1977 Chevy Nova running a 1962 small-journal 327 SBC, with build coverage published across multiple online automotive magazines. His media background spans long-form build documentation, install coverage, and product features across the magazine and the Car Junkie Magazine YouTube channel. He writes the way he wrenches: specific, honest about the mistakes, and grounded in real garage work.